FLASH-TITE Vent Stack Bases are available in the following sizes:
- 3-inch x 12-inch high – for 3-inch pipes
- 4-inch x 12-inch high – for 4-inch pipes
- 4-inch x 18-inch high – for 4-inch pipes
Available in aluminum only.
Category: Roof Flashings
FLASH-TITE Vent Stack Bases
$32.00 – $40.00
Description
FLASH-TITE Vent Stack Bases + FLASH-TITE Vent Stack Caps = FLASH-TITE Vent Stack Covers
FLASH-TITE Standard Vent Stack Covers are pre-manufactured weather-tight flashings designed to seal vent pipes to roof membranes. They are compatible with built-up, modified bitumen, and single-ply roofs.
Seamlessly spun from aluminum, FLASH-TITE Standard Vent Stack Covers consist of a base flange that is flashed into the roof membrane and a separate cap that is secured to the top of the vent pipe. Different sizes are available to accommodate most standard vent pipes in use today.
FEATURES AND BENEFITS
- Telescoping Action – Two-piece flashings allows for thermal expansion and contraction or deflection between the roof deck and the vent pipe, without compromising the weather tight seal
- Seamless Flashing – Vent Stack Bases and Caps are spun from a single piece of metal. There are no weld joints that can crack or leak.
- Proven Performance – FLASH-TITE Flashings have been in service for over 45 years
- Wide Flashing Flange – For assured adhesion and sealing to the roof membrane
- Adjustable – To accommodate short or high vent pipes
- Lead-Free – Concerns over contact with lead are not an issue with FLASH-TITE products
- Optional Insulation – Insulation of vent pipes eliminates the possibility of condensation running into the roofing systems in northern climates
TECHNICAL DATA
GENERAL CONSTRUCTION
- Base Metal: 1.6 mm (0.064″)
- Aluminum Cap Metal: 1.3 mm (0.051″)
- Aluminum Base Flange Width (all sizes): 100 mm ( 4″)
Additional information
| Weight | 14.59 lbs |
|---|---|
| Dimensions | 13 × 13 × 12 in |
| Sizes | 2 inch x 12 inch, 3 inch x 12 inch, 4 inch x 12 inch, 4 inch x 18 inch |
