Roof Flashings
LexGoShop.com features high-quality, roof flashing solutions from Lexcor’s Flash-Tite product-line. Roof Drains, Rigid Pipe and Conduit Flashings, Vents and Wire and Cable Flashings can all be found here.
-
Flash-Tite B-Vents are pre-formed metal flashings for sealing chimneys or hot pipes to low slope roofing systems.
-
FLASH-TITE Vent Stack Caps are available in 3 sizes:
- 3 inch cap - fits 3-inch pipe (to be used with FLASH-TITE 3" vent stack base)
- 4 inch cap - fits 4-inch pipe (to be used with FLASH-TITE 4" vent stack base)
- 4-3-inch cap - fits 3-inch pipe (to be used with FLASH-TITE 4" vent stack base)
-
FLASH-TITE Vent Stack Bases are available in the following sizes:
- 3-inch x 12-inch high - for 3-inch pipes
- 4-inch x 12-inch high - for 4-inch pipes
- 4-inch x 18-inch high - for 4-inch pipes
-
Flash-Tite™ Deck Clamps offer an alternative method for securing Flash-Tite™ Roof Drains to structural decks.
-
Flash-Tite™ Drain and Vent Seal provide a watertight seal between insert drains, such as Flash-Tite SuperDrains™, Flip-Top™ or SureFlow™ drains and the interior rainwater drainage pipe. They significantly retain most of the drainage area of the replacement drain over alternative seal systems.
-
Flash-Tite™ Universal Flow Control Inserts are used to regulate the flow of water from the roof where storm water flow rates are restricted by municipal regulation.
-
Flash-Tite B-Vents are pre-formed metal flashings for sealing chimneys or hot pipes to low slope roofing systems.
-
The tool used to perfectly tighten Lexcor's Maxxflo Retrofit Drain Seal to a drain pipe.
-
Flash-Tite One-Way Insulation Vents relieve vapour pressure and help remove moisture from the insulation layer in low-slope commercial roofs. They may be used in conjunction with built-up, modified bitumen or single ply roofing systems.
-
Flash-Tite Hooded Roof Vents are multi-use products designed to safely and efficiently discharge moisture-laden air, fumes and heat within the building or roof structure.
-
Lexcor’s Maxxflo Retrofit Roof Drain Seal is used to seal a retrofit roof drain to an existing drainpipe rapidly and efficiently.
-
Watertight retrofit roof drain seals for Fransyl drains and other compatible roof drains.
-
Polypropylene 2-wing attic vent, for sloped roofs, designed to prolong the life of the roof system by reducing moisture and trapped air pressure within the roof system
-
Polypropylene attic vent, for sloped roofs, designed to prolong the life of the roof system by reducing moisture and trapped air pressure within the roof system
-
Sure Flow Drains are economical roof drains for use with single-ply or modified bitumen membrane roofs. They feature a strainer that also acts as a mechanical clamp for the membrane flashing.
-
Featuring a calibration capability, Flash-Tite™ Super Drain Roof Drain Flow Control Insert is used to regulate the flow of water from the roof where storm water flow rates are restricted by municipal regulation.
-
1-wing design and openings allows optimal attic ventilation. Solid structure from one central cube with grid-style perforations, eliminating maintenance required by standard meshstyle openings, while still preventing rodents and birds from entering your attic.
-
3-wing design and openings allows optimal attic ventilation. Solid structure from one central cube with grid-style perforations, eliminating maintenance required by standard meshstyle openings, while still preventing rodents and birds from entering your attic.
-
Flash-tite Roof Drain Ballast Guards are used on protected membrane (inverted) roof assemblies to keep loose ballast from piling up against the strainer or falling through the strainer.
-
4-wing design and openings allows optimal attic ventilation. Solid structure from one central cube with grid-style perforations, eliminating maintenance required by standard meshstyle openings, while still preventing rodents and birds from entering your attic.
-
Flash-Tite Wire Outlet Posts provide a weather-tite solution for extending flexible wires and cables through low slope roof decks. They can be easily and securely flashed to any traditional or modern commercial roofing system. Wire Outlet Posts are pre-fabricated, engineered alternatives to jobsite flashing of wires and conduits.
-
Flash-Tite Gooseneck Flashing provides a weather-tite solution for extending wires and conduits through low slope roof decks.
-
Flash-Tite Super Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications, as well as in aluminum or copper.
-
Flash-Tite Super Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications, as well as in aluminum or copper.
-
Flash-Tite Flip-Top Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They feature a cast aluminum strainer that doubles as a clamping ring. Flip-top Drains are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications.
-
Flash-Tite Flip-Top Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They feature a cast aluminum strainer that doubles as a clamping ring. Flip-top Drains are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications.
-
Sure Flow Drains are economical roof drains for use with single-ply or modified bitumen membrane roofs. They feature a strainer that also acts as a mechanical clamp for the membrane flashing.
-
Flash-Tite Super Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications, as well as in aluminum or copper.
-
Flash-Tite Flip-Top Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They feature a cast aluminum strainer that doubles as a clamping ring. Flip-top Drains are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications.
-
Flash-Tite Super Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications, as well as in aluminum or copper.
-
Flash-Tite Flip-Top Drains are premium roof drains for use in all low slope roofs applications; more so, compatible with single ply, built-up or modified bitumen roofing membranes. They feature a cast aluminum strainer that doubles as a clamping ring. Flip-top Drains are available in a ‘new construction’ design or a ‘retrofit’ insert design for re-roofing applications.
-
Electrical Outlet Posts provide electricity conveniently located around the rooftop. They are ideal for temporary lighting, security, or maintenance operations and are compatible with any traditional or modern commercial roofing system.
-
Cable Outlet Posts are general purpose flashings that may be used either to flash vent pipes or heavy, flexible cables passing through low slope roofs.
